Kreg Owners' Community

Welcome to the Kreg Owners' Community!
 
This thread is the best place to introduce yourself and let other Community members get to know you. Please include your name, where you're from, your experience building with wood, why you joined this Community, and any other interesting facts about yourself. Also, feel free to share links to your blog, personal website, etc.

Once you've introduced yourself, be sure to check out Helpful Tips for New Members.

We hope that you find great use and enjoyment from the Kreg Owners' Community!

-KregRep

Views: 72796

Reply to This

Replies to This Discussion

Thanks for the kind words, Mark.  As bad as that finger looks, it never hurt at all.  All the doctor did was put a bandage on it and told me to come back in a week to have a look at it.  I did get back on that horse to finish that quilt rack and now I am looking for my next project.  Don't be concerned about your expertise.  Your skills will advance as you work with it and read tips and helps from other woodworking veterans.  And speaking of veterans, I sincerely thank you for your service in the Army.  I too am a veteran having served 4 years with the US. Air Force in Germany in the 1960's and leaving as a S/Sgt (E5).

------ Bob -------

Mark Buono said:

Sorry about your injury!  Looks pretty nasty!

You are light years ahead of my skills.  I look forward to growing as a woodworker, while keeping my digit inventory at a full 10 and 10.

Your quilt rack looks incredible.

-Mark

Thank Bob, especially for truly being a Brother in Arms.

I was in for a shade over 10 and left on the list for O4.  After Panama, Granada and DS1, it was time to enjoy a quieter life with my Bride.  I am "up there" in years but if I get busy, I'll have enough experience to take me through my more golden years!  (yes, the profile picture may be a bit dated)

Cheers.

Mark

Robert Ringel said:

Thanks for the kind words, Mark.  As bad as that finger looks, it never hurt at all.  All the doctor did was put a bandage on it and told me to come back in a week to have a look at it.  I did get back on that horse to finish that quilt rack and now I am looking for my next project.  Don't be concerned about your expertise.  Your skills will advance as you work with it and read tips and helps from other woodworking veterans.  And speaking of veterans, I sincerely thank you for your service in the Army.  I too am a veteran having served 4 years with the US. Air Force in Germany in the 1960's and leaving as a S/Sgt (E5).

------ Bob -------

Mark Buono said:

Sorry about your injury!  Looks pretty nasty!

You are light years ahead of my skills.  I look forward to growing as a woodworker, while keeping my digit inventory at a full 10 and 10.

Your quilt rack looks incredible.

-Mark

Hello, my name is Joe and am living in Brighton Colorado. I haven't done much wood working yet. But I am learning. Slowly but surely, some mistakes so far but nothing I wasn't able to fix. My background is in aircraft maintenance. Not to much wood on the aircraft I work on. Kreg system was purchased for the wife,she wanted to try it. Has been sitting for about a year and nothing so I thought I would give it a try. Started simple with a table from Ana White plans. Turned out ok, not great but usable. Now building the work bench from the Kreg plans. Found I needed a work bench to build the work bench! Turning out ok. Almost done,ordered the clamp track and clamps, just waiting for delivery to finish.

Good afternoon!

My name is Jon, live in Muncie Indiana, grew up helping my dad do woodworking, and just now got into it again once I got married.  I am hoping to learn more about the pocket jig, everyone I hear talk about it LOVES it, I cant seem to figure it out!  Guess I will post my questions in the question area!

Hi, I'm Barry from Jacksonville Florida. I consider myself an average DIYER, not a woodworker. I recently bought a pocket hole jig to make a shelf for the laundry room. The shelf is going in my shed, but the pocket holes were perfect. Still have to build the shelf. 

Hello, I am Josh, newb from Wisconsin. Just got a K5 Master kit. Can't wait to start using it.

Hello.  Go by Jim.  Live in the DFW area.

Starting to do more wood working to build some skills so when I retire (hopefully in about 6-8 years) I will keep busy making furniture for our retirement home.  Right now the only thing our furniture has in common is the Ikea label.

Hi my name is Mike and I live in NH.  I have been enjoying woodworking for years.  I have owned a cabinet shop and furniture shop. My son now runs the furniture shop.  I fell in love with Kreg products a long time ago.  Its one of the best products I have used.  In my area I usually do a couple Kreg demo's a year. Looking forward to seeing everyone's projects and sharing mine.

This is as basic as it gets!  My first attempt at using a Kreg jig (K5).  Since my workbench is buried in the shed under a decade's worth of old decorations, I figured it would be easier to build a new workbench than to dig the old one out.  I still have to glue the top two MDFs together but you get the idea.  The only cutting tool I had to work with was a Bladerunner X2 Portable saw.  It's a fun, lightweight saw, but at the end of the day, it's a jig saw mounted upside down.  Some of the wood was a bit tough to cut perfectly straight.  I've since gotten a chop saw.  Also, the jig saw cuts for the shelf was a bit (a lot) off but the project was a fun initiation into what a total novice (me!) can do with the Kreg K5.  Now I have a workbench.  Next project is a series of garage shelf units so I can make room for it in the garage.

Good morning! My name is Ron and I live in Westchester County, NY. For those of you not familiar, Westchester is just North of NYC but there's still a lot of open space here. Trying to get back into woodworking and not sure which Kreg product to start with. Looking for some input before I call the company for their recommendations.

Hi Ron,

I started off with the K5 system and a number of other little items, multi-mark, screw wheel, etc.  I have my eye on a couple of the Mobile Project Centers.  Just knocked out an 8' 4-tiers shelving unit for the garage last weekend.  All I had was the K5 jig system, a chop saw, tape measure (pencil), speed square and a drill.  Great little jig that K5.  Many improvements over the K4 and worth the money.

Mark

Hey Mark,

Thanks for the info. Will begin looking around for the best deal.

Mark Buono said:

Hi Ron,

I started off with the K5 system and a number of other little items, multi-mark, screw wheel, etc.  I have my eye on a couple of the Mobile Project Centers.  Just knocked out an 8' 4-tiers shelving unit for the garage last weekend.  All I had was the K5 jig system, a chop saw, tape measure (pencil), speed square and a drill.  Great little jig that K5.  Many improvements over the K4 and worth the money.

Mark

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

I have a problem with a k3 & k4

K3 problem the threaded insert is lose and will not hold setting. The k4 is worn and  hard to use. I was think maybe epoxy the insert in place may fix it. I tried wood glue did hold. Anyone else had the same problem? The k4 I have thought about…Continue

Started by Gary roofner in Beginners' Zone on Thursday.

Anyone using the Kreg Miter Gauge? 3 Replies

I'm thinking about getting the Kreg Miter Gauge instead of building a sled for my table saw. I figure the miter gauge would have more uses and since the stock will ride on the saw table there is no drop off like with some crosscut sleds. And it…Continue

Started by Marshall Harrison in Other Kreg® Products. Last reply by michael evans on Friday.

Pocket holes aren't deep enough 1 Reply

I'm having trouble getting my pocket holes deep enough. I'm using the kreg j4 system and using 3/4" stock 1 1/2" wide. I have set my jig to 3/4" high for the stock and set my drill bit to 3/4" to the tip. I'm pretty new at using this and I thought I…Continue

Started by JUSTIN RICHARDSON in Beginners' Zone. Last reply by Dave Johnson on Saturday.

Adaptive Cutting System 10 Replies

I really like the Adaptive Cutting System (ACS) and hope to buy it soon. My table saw really scares me as I have a bad knee that likes to buckle on me at inopportune times. I can just picture it happening at the table saw and tossing me into the saw…Continue

Started by Marshall Harrison in Beginners' Zone. Last reply by Marshall Harrison Mar 10.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm — 1 Comment

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_