Kreg Owners' Community

How do I attach a photo to my post, so when you open my post see it right away? I attached by going to browse when attach my photo. When you look at post there is no image. You have click the word image to look at the photo. How do I attach so that appears right away?

Views: 119

Reply to This

Replies to This Discussion

Greeting Da Bull, This is the steps I took to do this:

  1.from the "add reply" right click image in the top section

  2. click "browse" this takes you top the area on your computer where you store your documents or photos.

  3. select your item you want to display  and click "open" or "select" depending on computer settings

  4. On the "add reply" of community's page  right click mouse button to "center"  thus placing your photo as this one is shown.  Then right click  "ok" and your article will appear taking a few seconds to write it there from your computer.

  5. It appears as that above.   To add your text or comments expand the window using the side tools on this page  (diagonal slash marks just abovt the blue "add reply") and add your text or comments.    This will place your photo at the top of your reply. when satisfied with your reply,   Just click the "add reply "button below

Hope this answers your question.  This is counter insert of granite in a pre_ exhisting counter

Thank you that was very helpful!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_