Kreg Owners' Community

I've decided to get back into woodworking and dug out my old Kreg K2 jig. It's definitely a K2, not a K2000, being made of cast aluminum. 

I can't find a user manual anywhere.

The drill guides need to be raised up considerably to properly place the screws in "2-by" stock but either there wasn't any spacer included or I've lost it. I want to use 1.5" board to build my workbench.

Can anyone help?

WW

PS: Someone posted a user manual on another thread, saying it was for a K2, but it was for a K2000, I think Kreg's first blue plastic pocket hole jig. Did Kreg even have a user manual for the K2?

Views: 913

Reply to This

Replies to This Discussion

Unfortunately, the K2 was designed to work exclusively with 3/4" material and we do not offer an extension for 1 1/2" material. Some customers have built their own; however, it is not recommended. We apologize for the inconvenience. If you have any further questions, feel free to reach out to Technical Support directly at 800-447-8638 or technicalsupport@kregtool.com

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_