Kreg Owners' Community

My name is Dana and I live in Missouri. I am new here and what I would call a novice woodworker. I have just purchases a kreg jig after using one that I borrowed from a friend. I noticed that there are some project listed under the project tab. Can you get specs or plans to build them?

Views: 223

Reply to This

Replies to This Discussion

Dana,

Welcome!  The projects tab is community members posting projects that they have created, whether or not a Kreg jig was used.  You would have to contact the member making the project to see if they have plans available, and if they are willing to share them.  
Kreg will also post project plans in the Discussion Forums tab, the three most current projects are always at the top of the discussion list.  The plans are included in those posts.

Thanks Tim!

Hi Dana and welcome to the site as well.  If you're not successful finding what you're looking for here, Youtube and Pinterest have a lot of inspiration with plans.  I actually got turned on to Kreg Jig tools from watching two sisters who have both a website and a Youtube channel while looking for inexpensive furniture for my daughter's apartment when she went away to college.  So I made a few nightstands, etc for her room and haven't been able to stop.

http://www.shanty-2-chic.com

https://www.youtube.com/channel/UCMJiIIydhPvmDvLfeHvKiLQ

Thanks Tony, I didn't think about you tube. My wife has already had me build a couple of Pinterest projects :)

I didn't even think of Pinterest, U-tube and others.  A few woodworkers and crafters that I follow:

Ana White:  http://www.ana-white.com/

Steve Ramsey (Wood Working for Mere Mortals): http://woodworking.formeremortals.net/

Marc Spagnuolo (The Wood Whisperer): http://www.thewoodwhisperer.com/

David Picciuto (The Drunken Woodworker): https://makesomething.tv/

Izzy Swan:  http://www.izzyswan.com/

Jay Bates (Jay's Custom Creations):  https://jayscustomcreations.com/

Nick Ferry:  https://nickferry.com/

April Wilkerson: https://www.wilkerdos.com/

Thanks for posting these Tim......I follow all of those guys as well and second the recommendations.  And they all have YouTube channels as well.

@ tim grace those are some great people to follow, i just recently built the miter saw station that jay bates built, its huge and came out pretty dam good

Dan Coffey,

Yes, Jay's miter saw station is pretty awesome.  I don't have the room in my shop to build something like that.  I'd like to get a set of those drawer pulls - I'm a Detroit Red Wings fan.  I grew up watching Gordie Howe and MIckey Redmond play at the Olympia.

Everything in my shop is mobile so I can still get my truck in the garage, if needed. 



dan coffey said:

@ tim grace those are some great people to follow, i just recently built the miter saw station that jay bates built, its huge and came out pretty dam good

here is my copy



Tim Grace said:

Dan Coffey,

Yes, Jay's miter saw station is pretty awesome.  I don't have the room in my shop to build something like that.  I'd like to get a set of those drawer pulls - I'm a Detroit Red Wings fan.  I grew up watching Gordie Howe and MIckey Redmond play at the Olympia.

Everything in my shop is mobile so I can still get my truck in the garage, if needed. 



dan coffey said:

@ tim grace those are some great people to follow, i just recently built the miter saw station that jay bates built, its huge and came out pretty dam good

Nice job, Dan.  

It looks like we have some of the same tools - the Skil drill press and the Delta table saw.  I went with a Craftsman 10" compact sliding miter saw rather than the DeWalt.  The size and price of the Dewalt is what had me go to the Craftsman.

dan coffey said:

here is my copy




Tim Grace said:

Dan Coffey,

Yes, Jay's miter saw station is pretty awesome.  I don't have the room in my shop to build something like that.  I'd like to get a set of those drawer pulls - I'm a Detroit Red Wings fan.  I grew up watching Gordie Howe and MIckey Redmond play at the Olympia.

Everything in my shop is mobile so I can still get my truck in the garage, if needed. 



dan coffey said:

@ tim grace those are some great people to follow, i just recently built the miter saw station that jay bates built, its huge and came out pretty dam good

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Adaptive Cutting System

I really like the Adaptive Cutting System (ACS) and hope to buy it soon. My table saw really scares me as I have a bad knee that likes to buckle on me at inopportune times. I can just picture it happening at the table saw and tossing me into the saw…Continue

Started by Marshall Harrison in Beginners' Zone on Tuesday.

Ulimate K4 3 Replies

I really like my K4 pocket hole jig but I had a big cabinet project coming up so I wanted a way to clamp the boards to it faster than the toggle clamp alowed. I had seen some other people make pocket hole jigs with pneumatic cylinders in place of…Continue

Tags: k4, Pneumatic

Started by Iain Portalupi in Kreg Jig® Projects. Last reply by Marshall Harrison yesterday.

Octagonal picnic table 2 Replies

Any plans available? Worked with wood before. Just got my Kreg5. Have a camp in the Adirondacks. Workshop there.

Started by MICHAEL FLANAGAN in Beginners' Zone. Last reply by MICHAEL FLANAGAN yesterday.

Farmhouse Table Plans 2 Replies

Dear Kregeers,I would like to try and build a farmhouse table with extensions in the middle to seat 12.I have seen some plans on Ana White and Buildsomething, along with others. Unfortunately, most, if not all the plans are for extensions at the…Continue

Started by Lupe in Beginners' Zone. Last reply by Lupe Feb 12.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_