Kreg Owners' Community

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.

i tightened up the screws underneath in various stages up to fully tightened, makes no difference.

I do not get the two clicks and I can slide the clamp back without using the grey push tab. 

Then in I noticed the teeth slant backwards and this makes no sense to me, as nothing would offer resistance to the clamp then. Can someone check theirs for me and let me know if they are the same? I can only come up with , mine are installed wrong way round. 

Views: 42

Reply to This

Replies to This Discussion

Yes the teeth should be towards the clamp. One may have slipped thru the cracks at Kreg. Not an unheard of ordeal with a company that produces so much product. I'm certain they will remedy your situation post haste.

Thanks. I will just return it to where I bought it and get another.

Things happen. I have the setup table which is great and just about to use the Accu cut I bought, so happy with the brand in general. 

I'm sure they will let you open the next box before you leave with it just to double check it.

They did, we just swapped over the main unit and I was on my way. Definitely installed backwards, but I have one that locks now, so am happy again. I bought a newish home that has no wardrobe shelves or hangers etc, and plan to build them all myself as a first project, and is why I bought the Kreg stuff. I could easily make it from melamine, but I am not a fan and not convinced pocket holes would work so well in that material, but least I could avoid painting !

So I bought this K5 some time back in anticipation of doing them and am looking forward to the job

Glen S said:

I'm sure they will let you open the next box before you leave with it just to double check it.

You have a good store to buy from!! I'm glad it's all worked out!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Kreg Accu-Cut and Rip-Cut 4 Replies

First off tried to mention all this to Kreg via Email and just because I live outside the USA seems that the system does not work as they say phone number invalid, which is not.OK bought a Accu-Cut and set it up no problems there worked OK both…Continue

Started by Kenneth J Hunt in Other Kreg® Products. Last reply by Kenneth J Hunt on Wednesday.

Router bits 4 Replies

Tungsten carbide? Skill level is beginning woodworker

Started by MINICOOPERUSAF in Beginners' Zone. Last reply by Tim Grace on Monday.

R3 part

hi all can anybody help got r3 for Xmas and I have noticed that the gray tabs are different think somebody  in assembly was talking the piss day and I have 1 metric side and imperial side so they don’t match up hellllp plzericContinue

Started by Eric Kershaw in Beginners' Zone Jan 8.

Having issues with K5 5 Replies

I watched the setup videos, searched for information and spent half a day and can not get the clamp to hold.i tightened up the screws underneath in various stages up to fully tightened, makes no difference.I do not get the two clicks and I can slide…Continue

Started by Todd Caldwell in Beginners' Zone. Last reply by Glen S Jan 7.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 4 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_