Kreg Owners' Community

Get MORE from your Foreman with HD and Micro-Pocket™ Foreman Drill Bits!

The all-new Foreman Pocket-Hole Machine lets you create high-speed pocket holes with twice the speed and half the effort of a standard pocket-hole jig. The Foreman comes with a standard 3/8" Kreg stepped drill bit to get you started—for materials from 1/2"- to 1-1/2"-thick. To meet all of your project-building needs, the Foreman is also compatible with the Kreg Micro-Pocket™ Bit and the Kreg HD (Heavy-Duty) Bit.

The Foreman DB210 can drill high-speed pocket holes in 1/2"-thick material and narrow stock, down to 1"-wide. All you need is the Foreman Micro-Pocket™ Drill Bit with Drill Guide. This bit is perfect for adding detail, building cabinet frames, doors, and drawers, and for smaller projects. A Micro-Pocket™ Replacement Bit without Drill Guide is also available.

Additionally, with the Foreman DB210, you can quickly and easily create strong joints in 1-1/2" and thicker stock. All you need is the Foreman HD (Heavy-Duty) Drill Bit with Drill Guide. With this bit, you can easily build outdoor projects, construct strong deck rails, and even frame walls. An HD Replacement Bit without Drill Guide is also available.

If you'd like to stock up on standard Kreg drill bits for your Foreman, here is the correct bit to order: Hex Shank Pocket-Hole Drill Bit. And, if any of your Kreg drill bits are starting to dull, we offer a Drill-Bit Sharpening Service right here at Kreg.

Views: 296

Reply to This

Replies to This Discussion

Thanks for the informative nudge down the road of Foreman, we were wondering how we would do our face frames with the foreman, lol.

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_