Kreg Owners' Community

Create the perfect companion to your outdoor grill with this rolling cart. It offers space to store your supplies and ingredients, plus a metal top that looks great and is easy to clean.

Best of all, the cart sits on swiveling rubber wheels that make it easy to move around, even on rough concrete or patio blocks. And, since the cart is made from cedar, it can hold up to the elements that come with living outside. 

Your free plan is attached in PDF format below. If you would like to print the plan, you will need to save it to your computer and open it in Adobe Reader. If you don't have Adobe Reader installed on your computer, you can download it for free here.
Once you're done building, be sure to share your project for all Community members to enjoy! Happy Building!

Sign up for Kreg Owners' Community News to receive a FREE project plan, themed project inspiration, and other great content delivered straight to your email inbox every month! 

Views: 12947

Attachments:

Reply to This

Replies to This Discussion

Sheet metal top to hot for Texas travertine tile would work better in the sun.

I'm new here I clicked the link to download the plans and it takes me to a page with a picture and description. Where do I find the actual plans?

http://kregjig.ning.com/main/search/search?q=plans

David said:

I'm new here I clicked the link to download the plans and it takes me to a page with a picture and description. Where do I find the actual plans?
I have the same problem

Hi David. I apologize for the confusion. The plan PDF is attached at the very bottom of the discussion where it says "Attachments." 

David said:

I'm new here I clicked the link to download the plans and it takes me to a page with a picture and description. Where do I find the actual plans?

uuuu

i'm in the middle of this build, and have come across a problem. 

built the sides and shelves according to plan. when it came to the top, however, the plan doesn't call for leaving the top frame just proud of the 2x2 3/4" plywood. if you do that, there's room to drop the steel square flush with the frame. if the plywood is flush with the frame, the steel just sits on top the plywood, waiting for an edge to be caught by something.

unfortunately, i only discovered this after i had screwed the plywood into the frame and turned it over...

Carol, did look at the plan you used , if you just screwed the top frame to the ply wood top , you could take it apart and make a new top frame a   little thicker  , so the metal sits down inside , but if you used glue , maybe you could make another top frame a little wider , with a small dado  to go over the metal top  to hide the sharp edge  and glue it to the top already on the cart !!  Maybe they could revise the plan to make the top frame a bit thicker or the ply wood top a bit thinner , so the sheet metal goes down inside , only a suggestion !! Would also call customer service in the morning to see what think ( 1-800-447-8638 ) looks like a nice project and hope it work,s out for you , have a good day , JIM !!!

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Adaptive Cutting System

I really like the Adaptive Cutting System (ACS) and hope to buy it soon. My table saw really scares me as I have a bad knee that likes to buckle on me at inopportune times. I can just picture it happening at the table saw and tossing me into the saw…Continue

Started by Marshall Harrison in Beginners' Zone 16 hours ago.

Ulimate K4 1 Reply

I really like my K4 pocket hole jig but I had a big cabinet project coming up so I wanted a way to clamp the boards to it faster than the toggle clamp alowed. I had seen some other people make pocket hole jigs with pneumatic cylinders in place of…Continue

Tags: k4, Pneumatic

Started by Iain Portalupi in Kreg Jig® Projects. Last reply by Marshall Harrison 16 hours ago.

Octagonal picnic table 1 Reply

Any plans available? Worked with wood before. Just got my Kreg5. Have a camp in the Adirondacks. Workshop there.

Started by MICHAEL FLANAGAN in Beginners' Zone. Last reply by R. E. Woods on Saturday.

Farmhouse Table Plans 2 Replies

Dear Kregeers,I would like to try and build a farmhouse table with extensions in the middle to seat 12.I have seen some plans on Ana White and Buildsomething, along with others. Unfortunately, most, if not all the plans are for extensions at the…Continue

Started by Lupe in Beginners' Zone. Last reply by Lupe Feb 12.

Product Reviews

Merry Christmas r3

 Hi all Santa left me one under the tree the elf thar made it must have had a bad morning because one gray tab is metric and the other one is imperial help Santa what do I do

thanks Eric 

Posted by Eric Kershaw on January 8, 2019 at 6:27pm

Kreg Project Center Work Station

The Kreg Project Center is great by itself, but 2 KPC's are better than 1 when you want to set up a 12 ft. work station in a couple minutes.…

Continue

Posted by Glenn Revheim on April 5, 2018 at 5:57am — 5 Comments

Festool Domino 500

The first thing I will do is set price aside and focus on the tool and why I bought the Domino. 

      I have orders for a few dining tables and chairs.  I have made one prototype chair, while I have all the tools to make angled…

Continue

Posted by justin waldron on April 2, 2018 at 5:46am — 2 Comments

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

© 2019   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_