Kreg Owners' Community

I'm new here, but have an excellent question.  As I read though post, I see people insert links to charts for kreg screws, board thickness, ect.  So now when I have a question about something like what screw to use with what boards, where do you find all these fancy charts?  Or am I just not looking in the right places.

Views: 407

Reply to This

Replies to This Discussion

see this thread Is There a Kreg Jig Screw Matrix Available???

hope it helps
This reallty wasn't what I was thinking, but thanks.

I have seen several different charts in several different post and am looking for one place to go and find find them without having to remember what post it was in.
Adam,
Everything you need should be here: http://www.kregtool.com/PocketHole-Screws-and-Plugs-Prodlist.html
If you want a PRINTABLE chart though, I can upload those as well. Or you can download the 2010 Kreg Catalog.

Have a good weekend!
KregRep

Reply to Discussion

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_