Tags:
I would think that they would absorb the stain at a different rate, resulting in darker or lighter coloring between the three. Is finishing in clear an option?
I would really like to do the top in a dark stain. Would the table not look right if I did the aprons and the legs in just a clear? And by clear do you mean like a Danish oil or something like that ?
The aprons & legs are on a vertical plane. Top is on a horizontal plane. Light play off these planes differently. The apron for example will be in the shadows of the overhanging top. Make a quick mock up with some scraps & stain both pieces at the same time. Hold them in the room at the correct level & look them over.
Always test your finish on scraps 1st. It's the "Measure twice cut once." rule for finishing IMHO.
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service