attaching track saw to Kreg Rip-Cut - Kreg Owners' Community2024-03-29T15:07:59Zhttps://kregjig.ning.com/forum/topics/attaching-track-saw-to-kreg-rip-cut?feed=yes&xn_auth=noHi Dave,
I like the way you…tag:kregjig.ning.com,2018-01-22:2900167:Comment:9383932018-01-22T14:02:04.687ZDan Ducehttps://kregjig.ning.com/profile/DanDuce
<p>Hi Dave,</p>
<p></p>
<p>I like the way you think! I'm always trying to find easier ways to save steps on repetitive tasks.</p>
<p></p>
<p>I don't think what you're describing here would work though. If I'm reading you correctly, you want to keep your track on your Dewalt track saw AND attatch the Rip-Cut to that?</p>
<p></p>
<p>The circ saw sits on a little sled that attaches it to the Rip-Cut and when you use it you push the saw and that pushes the sled forward. You would have to rig…</p>
<p>Hi Dave,</p>
<p></p>
<p>I like the way you think! I'm always trying to find easier ways to save steps on repetitive tasks.</p>
<p></p>
<p>I don't think what you're describing here would work though. If I'm reading you correctly, you want to keep your track on your Dewalt track saw AND attatch the Rip-Cut to that?</p>
<p></p>
<p>The circ saw sits on a little sled that attaches it to the Rip-Cut and when you use it you push the saw and that pushes the sled forward. You would have to rig up some way to attach the Rip-Cut to your Dewalt over top of the existing Dewalt track to use them together.</p>
<p></p>
<p>Wouldn't it be easier to just cut a couple of pieces of plywood scrap to use as spacers and clamp them along the edge of the sheet you were cutting, then set the track up against the spacers? </p>
<p></p>
<p>Cheers,</p>
<p></p>
<p>Dan</p> Hi Kain-The Accu-Cut is desig…tag:kregjig.ning.com,2017-11-14:2900167:Comment:9275062017-11-14T21:41:49.797ZKregRephttps://kregjig.ning.com/profile/KregRep
<p>Hi Kain-<br></br><br></br>The <a href="https://www.kregtool.com/store/c48/saw-attachments/p425/accu-cut/?source=1677" target="_blank">Accu-Cut</a> is designed for use with circular saws. You can mount almost any circular saw - left or right blade - the Universal Sled. <br></br><br></br></p>
<p>Most corded and cordless saws with blades from 6" to 7-1/4" are compatible. The blade can be on the left or right side. Some cordless saws with small blades (4" diameter and under) can be challenging to fit. The saw…</p>
<p>Hi Kain-<br/><br/>The <a href="https://www.kregtool.com/store/c48/saw-attachments/p425/accu-cut/?source=1677" target="_blank">Accu-Cut</a> is designed for use with circular saws. You can mount almost any circular saw - left or right blade - the Universal Sled. <br/><br/></p>
<p>Most corded and cordless saws with blades from 6" to 7-1/4" are compatible. The blade can be on the left or right side. Some cordless saws with small blades (4" diameter and under) can be challenging to fit. The saw shoe (base) can be cast or stamped metal. We recommend staying away from saws with plastic blade-guard housings. Worm-drive saws will not work with the Accu-Cut.<br/><br/>If you have any further questions, feel free to contact Technical Support at toll-free 800-447-8638 or <a href="http://technicalsupport@kregtool.com" target="_blank">technicalsupport@kregtool.com</a></p>