Kreg Owners' Community


I own a Dewalt track saw and am wondering if it can fit on the Kreg Rip-Cut guide.

I’m looking for way to make repetitive cuts with the track saw (without investing lots of money).

Anyone ever tried this?

Thanks for your feedback

Views: 196

Reply to This

Replies to This Discussion

Hi Kain-

The Accu-Cut is designed for use with circular saws. You can mount almost any circular saw - left or right blade - the Universal Sled. 

Most corded and cordless saws with blades from 6" to 7-1/4" are compatible. The blade can be on the left or right side. Some cordless saws with small blades (4" diameter and under) can be challenging to fit. The saw shoe (base) can be cast or stamped metal. We recommend staying away from saws with plastic blade-guard housings. Worm-drive saws will not work with the Accu-Cut.

If you have any further questions, feel free to contact Technical Support at toll-free 800-447-8638 or

Hi Dave,

I like the way you think!   I'm always trying to find easier ways to save steps on repetitive tasks.

I don't think what you're describing here would work though.   If I'm reading you correctly, you want to keep your track on your Dewalt track saw AND attatch the Rip-Cut to that?

The circ saw sits on a little sled that attaches it to the Rip-Cut and when you use it you push the saw and that pushes the sled forward.  You would have to rig up some way to attach the Rip-Cut to your Dewalt over top of the existing Dewalt track to use them together.

Wouldn't it be easier to just cut a couple of pieces of plywood scrap to use as spacers and clamp them along the edge of the sheet you were cutting, then set the track up against the spacers? 



Reply to Discussion


Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 


  • Add Videos
  • View All


K4 Jig Clamp Screw 4 Replies

Started by John Bilton in Beginners' Zone. Last reply by Glen S on Thursday.

Cabinet construction 2 Replies

Started by Michael B in Beginners' Zone. Last reply by Glen S Mar 13.

Calculating Screw Penetration Depth 1 Reply

Started by Ken Kortch in Kreg Jig® Operation. Last reply by Ken Kortch Mar 11.

Finishing, what works for me

Started by justin waldron in Beginners' Zone Mar 4.

Product Reviews

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.



Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service