Kreg Owners' Community

Im looking for plans for an outdoor chair or bench. Any Links or PDFs would be GREAT!

Matt

Views: 513

Reply to This

Replies to This Discussion

Matt,
Here's a link to our project plan page. The only one we have currently that might be a fit for what you're looking for is our "Potting Bench" plan. If you're looking to make an adirondack chair, I'd recommend checking out Lowes' Shop Class where they do a step-by-step video project along with the plans you can download on their site.

If neither of these two options work for you, I'd recommend you make a trip over to www.plansnow.com. Most of their project plans don't utilize Kreg Jigs, but almost all of them can be adapted to do so. You've just got to do some thinking on how to compensate. For instance, if they're having you connect the two pieces of wood via Mortise and Tenon with a 1" tenon on each side, you're going to need to reduce the length of the workpiece by 2" to use your Kreg Jig. In the end, you'll be making whichever project plan you choose to undertake much faster and easier by doing so.

Good luck! I hope you find what you need!
matt
i keep a lot of wood working books on hand and i can scan some plans for you if you like i keep them for my customers full color books help them with wkat they what.you need to go to woodworkersbookclub.com
dave
Hi Matt
Did your find the patio furniture plans
If so can I get a copy just wanted tell you thanks I'm so just wanted tell you thanks I'm so looking forward to looking for by your house

Corner Chair

Armless Chair

The above both are using 1x4

Modified version of above using 2x4

I finished the complete sectional using 2x4 Cedar and it turned out fantastic. I will wait for 1 season for weathering and then stain it using TWP or Armstrong Clark stains.

Outdoor dining table and matching bench

Here are the photos of my semi-completed work. This was my first wood working project.

Reply to Discussion

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Accu-Cut: Set Screws in Track Keep Coming Loose 1 Reply

Started by Dan Duce in Beginners' Zone. Last reply by KregRep 14 hours ago.

Is my drill speed set too high when screwing? 1 Reply

Started by Matthew Hinton in Beginners' Zone. Last reply by Dan Duce 16 hours ago.

Solid wood plugs too short? 2 Replies

Started by Doc JL in Other Kreg® Products. Last reply by KregCS Jan 15.

Euro hinges jig question 9 Replies

Started by Laura in Beginners' Zone. Last reply by Laura Jan 6.

Tapered Table Legs 6 Replies

Started by Pamela Anders in Beginners' Zone. Last reply by Anthony Saba Jan 12.

Product Reviews

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_