View
Discussions Replied To (5) | Replies | Latest Activity |
---|---|---|
"Hi, Tim. Thank you for your response. I might try fashioning a 'jig' set-up to acc…"John Tomkinson replied Dec 24, 2015 to The Kreg 90 degree Clamp |
4 |
Dec 26, 2015 Reply by Ken Darga |
"John Tomkinson here. I meant to type "Right-Angle Clamp".....still new at this. Jo…"John Tomkinson replied Dec 22, 2015 to The Kreg 90 degree Clamp |
4 |
Dec 26, 2015 Reply by Ken Darga |
"Hi Glen. I live in Western Canada and have been retired for over a decade now. I'm…"John Tomkinson replied Nov 20, 2014 to HELLO THERE |
3 |
Nov 21, 2014 Reply by Glen Redmond |
"When I joined my Saw Caddy project, I utilized 1-inch pan head screws to join the 1/…"John Tomkinson replied Nov 10, 2014 to Splitting/Tearout |
4 |
Nov 22, 2014 Reply by Paul E. Pierce |
"I support the comment to 'clamp down' your wood pieces tightly together prior to dri…"John Tomkinson replied Nov 10, 2014 to Splitting/Tearout |
4 |
Nov 22, 2014 Reply by Paul E. Pierce |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service