Kreg Owners' Community

Ken Darga's Discussions (2,128)

Discussions Replied To (2107) Replies Latest Activity

"I sometimes get ''little tear-outs'', on plywood, when using my router--- which turn…"

Ken Darga replied May 28, 2011 to Why my pocket holes are not smooth?

2 May 28, 2011
Reply by Ken Darga

"I get smooth cuts, one needs a drill with a ''fast rpm'' drilling speed---I use a dr…"

Ken Darga replied May 27, 2011 to Why my pocket holes are not smooth?

2 May 28, 2011
Reply by Ken Darga

"For edge trimming/banding, that would get rounded, or the like, I'd go with biscuit…"

Ken Darga replied May 25, 2011 to Pocket hole joinery and round-over bits

10 May 26, 2011
Reply by John Schaben

"In the northern country, it may be common practice to start with a 1/4'' gap, betwee…"

Ken Darga replied May 24, 2011 to Using Deck Jig.

19 May 25, 2011
Reply by Noah Cantrel

"James, Problem solved for me ---I got both, the K3 and the K4. I use both---one or t…"

Ken Darga replied May 24, 2011 to 30,000 Members!

18 Jun 13, 2011
Reply by Rod Lowell

"Jens, The 4x4 post, on your deck, needs to be secured ''solid''---without any potent…"

Ken Darga replied May 24, 2011 to 4x4 to 2x6 setting

9 May 30, 2011
Reply by Phil Luciani

"Anyone use Minwax® Paste Finishing Wax ? http://www.minwax.com/wood-products/specia…"

Ken Darga replied May 21, 2011 to Tablesaw sled

37 May 26, 2011
Reply by Hugh Clare

"Jay, Thanks for your detailed inputs. Lots of ''great'' info. Very Helpful---lots to…"

Ken Darga replied May 21, 2011 to Tablesaw sled

37 May 26, 2011
Reply by Hugh Clare

"While searching thru stacks of ''fir'' plywood, at various suppliers, I've found 5/8…"

Ken Darga replied May 20, 2011 to Pilot hole depth problem

12 May 24, 2011
Reply by Otto Johansen

"I'd suggest ''squaring off'' the pieces to be joined--- hold the pieces in place wit…"

Ken Darga replied May 20, 2011 to Kreg KHC-90DCC 90-degree Corner Clamp

9 Feb 1, 2015
Reply by Scott

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_