Kreg Owners' Community

KregCS's Discussions (165)

Discussions Replied To (165) Replies Latest Activity

"Ken,  Thank you for the suggestion.  Unfortunately we do not offer a pin like you a…"

KregCS replied Feb 5 to Suggestion: K4 Drill Guide Pin with Square Drive

1 Feb 5
Reply by KregCS

"Doc,  The pocket hole plugs are designed to be use in material that ranges from 3/4…"

KregCS replied Jan 15 to Solid wood plugs too short?

3 Feb 9
Reply by Glen S

"Laura,  I'm sorry to inform you that we do not recommend using other drill bits wit…"

KregCS replied Jan 4 to Euro hinges jig question

9 Jan 6
Reply by Laura

"Terry,  Ken would be correct in the actual opening size from the pad to the tip. How…"

KregCS replied Dec 4, 2017 to Right angle clamp question

2 Dec 4, 2017
Reply by KregCS

"Terry,  Depending on the density of the hardwood you are using, the coarse-thread sc…"

KregCS replied Dec 4, 2017 to Joining softwood to hardwood

4 Dec 15, 2017
Reply by Mik Etn

"Sheldon,  We have looked and cannot seem to find the plan you are referring to.  If…"

KregCS replied Nov 22, 2017 to build the boxes that house the bit drawers for the Router table cabinet

1 Nov 22, 2017
Reply by KregCS

"Steve,  Is the material you are working with actually 1"?  If so you will want to s…"

KregCS replied Jul 25, 2017 to What size screws to use in 1 inch material

5 Jul 25, 2017
Reply by Steve Howe

"Steve,  Which jig is it that you have?  If you could let me know I would be able to…"

KregCS replied Jul 24, 2017 to What size screws to use in 1 inch material

5 Jul 25, 2017
Reply by Steve Howe

"Toby,  Unfortunately due to the size of the plate on this unit I would not recommen…"

KregCS replied Jul 14, 2017 to Track Guides

1 Jul 14, 2017
Reply by KregCS

"Mike,  According to Bosch's website, they should both be able to attach using the s…"

KregCS replied Jul 13, 2017 to does anybody Router table insert PRS4036 will work with Bosch MRF23EVS?

2 Jul 13, 2017
Reply by KregCS

RSS

Need Help?

For Technical Support, call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm (CST). 

Videos

  • Add Videos
  • View All

Forum

Pneumatic conversion pocket hole

Started by Michael B in Beginners' Zone on Tuesday.

Kreg Storage 2 Replies

Started by Jim Mahan in Kreg Jig® Projects. Last reply by R. E. Woods yesterday.

Old Kreg Jig - K1?

Started by Kent Bruner in Kreg Jig® Purchasing on Monday.

concealed hinge jig stop collar 1 Reply

Started by Joe Grane in Other Kreg® Products. Last reply by KregRep on Monday.

Kreg Jig K3 defect or not? 5 Replies

Started by Igor in Kreg Jig® Purchasing. Last reply by Randy Hills on Tuesday.

Product Reviews

Kreg Foreman

I have built many kitchens and finally decided to buy the Foreman, because my latest kitchen consisted of 28 cabinets and I was over my hand hurting from all the drilling, moving the clamp etc., it seemed like a smart choice.

The…

Continue

Posted by justin waldron on January 8, 2018 at 4:05am — 2 Comments

Kreg K5 Jig Review

Posted by Daris R. on November 20, 2017 at 5:39pm

© 2018   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_