Kreg Owners' Community

Robert J Guidry Sr's Discussions (103)

Discussions Replied To (97) Replies Latest Activity

"I have used a Ridgid for several years now and have no complaints, they can be purch…"

Robert J Guidry Sr replied Nov 13, 2010 to thickness planers

12 Dec 30, 2015
Reply by Elizabeth Leveques

"Check your Jig setup, drill stop depth, and your board thickness, make sure they are…"

Robert J Guidry Sr replied Nov 12, 2010 to My screw tips are showing...please help

11 Dec 7, 2010
Reply by Joseph E. Esquivel

"I do not have a Kreg table, I have a Oak Park table, but the basics for mounting the…"

Robert J Guidry Sr replied Nov 12, 2010 to Router and Router table

30 Dec 30, 2015
Reply by Elizabeth Leveques

"I bought the 90 deg. attachment Greg is talking about to add face frames to upper ca…"

Robert J Guidry Sr replied Nov 11, 2010 to Pocket holes in tight places?

11 Dec 30, 2015
Reply by Elizabeth Leveques

"Works good for larger chips, catches some of the dust, but some still gets through.…"

Robert J Guidry Sr replied Nov 10, 2010 to How well dose a shop vac with a seperator work for dust collecting

25 Feb 14, 2015
Reply by Lykle Schepers

"Anyone interested, I purchased a Router Raizer from Rockler. When I ordered it it wa…"

Robert J Guidry Sr replied Nov 9, 2010 to Inexpensive router lift home built found on the internet.

5 Nov 9, 2010
Reply by Gary roofner

"That is fine. If you go too far, your screw will come out the board you are screwing…"

Robert J Guidry Sr replied Nov 8, 2010 to drilling

3 Dec 30, 2015
Reply by Elizabeth Leveques

"Hi Peter, welcome to the community. I do not have any specific plans for your cab…"

Robert J Guidry Sr replied Nov 3, 2010 to New Members: Please Introduce Yourself!

3061 Apr 4, 2023
Reply by WESLEY HUNT

"The only way I know to get poplar plugs is to cut them with a 3/8" plug cutter. You…"

Robert J Guidry Sr replied Oct 31, 2010 to Raised panels with Kreg.

11 Dec 30, 2015
Reply by Elizabeth Leveques

"I have made many cabinets using pocket hole joinery. About the only joints I don't u…"

Robert J Guidry Sr replied Oct 30, 2010 to How good are Kreg Built cabinets?

20 Feb 4, 2017
Reply by Ken Kortch

RSS

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST. 

Videos

  • Add Videos
  • View All

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters.  What setting on the Jig should I used? 1 ½ is too much.  Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction.  I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

© 2024   Created by KregRep.   Powered by

Badges  |  Report an Issue  |  Privacy Policy  |  Terms of Service

_