View
Discussions Replied To (5) | Replies | Latest Activity |
---|---|---|
"I'll have to try that. But I am wondering if Kreg is ever going to make the plugs. "John Ricker replied Sep 26, 2010 to Micro Jig clamp? |
7 |
Mar 19, 2012 Reply by Robert Rea |
"A couple of ideas: One, are you using an impact driver? I used one when I first sta…"John Ricker replied Sep 26, 2010 to Protruding out the side |
23 |
Dec 30, 2015 Reply by Elizabeth Leveques |
"The problem with dowels is that the micro jig hole is 19/64" in diameter. I don't kn…"John Ricker replied Sep 26, 2010 to Micro Jig clamp? |
7 |
Mar 19, 2012 Reply by Robert Rea |
"I have a Dremel multi-max that I use with a flush cut blade. It cuts through the plu…"John Ricker replied Sep 26, 2010 to Using the Kreg Plugs |
14 |
Sep 29, 2010 Reply by Paula Geihs |
"Paint markers work well for this also. Just color in the areas with the paint marker…"John Ricker replied May 3, 2010 to Visible markings on your Kreg Jig |
25 |
Oct 16, 2011 Reply by Rusty Berkebile |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service