Matt B's Discussions (10)

View

Discussions Replied To (8)	Replies	Latest Activity
"Ken....but I should be alight using the Rockler brand setup?" Matt B replied Apr 10, 2013 to Rockler Hold Down Clamps	7	Apr 10, 2013 Reply by Ken Darga
"Ken....Thanks for the reply. I know that the tracks and clamps are extremely useful…" Matt B replied Apr 10, 2013 to Rockler Hold Down Clamps	7	Apr 10, 2013 Reply by Ken Darga
"My buddies Bench has the Kreg T Track and Kreg Bench Clamp. I was hoping that those…" Matt B replied Apr 9, 2013 to Rockler Hold Down Clamps	7	Apr 10, 2013 Reply by Ken Darga
"How did you make a stop groove on a table saw? You would have to push the piece dow…" Matt B replied Feb 2, 2012 to Rail and Stile constructions with Kreg Jig and pocket screws	17	Feb 26, 2012 Reply by ray vile
"David - Yes How did you accomplish this in the stiles? No way you made those groov…" Matt B replied Feb 1, 2012 to Rail and Stile constructions with Kreg Jig and pocket screws	17	Feb 26, 2012 Reply by ray vile
"Not sure if I should start a new thread for this question: Building a face frame wi…" Matt B replied Feb 1, 2012 to Rail and Stile constructions with Kreg Jig and pocket screws	17	Feb 26, 2012 Reply by ray vile
"something like this side panel in the picture, does that give you an idea? " Matt B replied Feb 1, 2012 to Rail and Stile constructions with Kreg Jig and pocket screws	17	Feb 26, 2012 Reply by ray vile
"What about like a side panel for say a dresser build? Could I still go the rabbet r…" Matt B replied Feb 1, 2012 to Rail and Stile constructions with Kreg Jig and pocket screws	17	Feb 26, 2012 Reply by ray vile

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

1	New Members: Please Introduce Yourself!
2	Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
3	Bench
4	Bench1

Matt B's Discussions (10)

"Ken....but I should be alight using the Rockler brand setup?"

"Ken....Thanks for the reply. I know that the tracks and clamps are extremely useful…"

"My buddies Bench has the Kreg T Track and Kreg Bench Clamp. I was hoping that those…"

"How did you make a stop groove on a table saw? You would have to push the piece dow…"

"David - Yes How did you accomplish this in the stiles? No way you made those groov…"

"Not sure if I should start a new thread for this question: Building a face frame wi…"

"something like this side panel in the picture, does that give you an idea? "

"What about like a side panel for say a dresser build? Could I still go the rabbet r…"

Need Help?

Popular Posts & Projects

Videos

Forum

Product Reviews