Dan F.'s Discussions (27)

View

Discussions Replied To (27)	Replies	Latest Activity
"You will want to use fine threaded screws in this application since you are working…" Dan F. replied Jun 24, 2010 to Kreg Jig Jr. - 2" or 3" wood	6	Jun 23, 2018 Reply by Marcos Chacon
"I was curious if the material are working with is a true 3/4" thick. Even if it is 1…" Dan F. replied Jun 15, 2010 to Protruding out the side	23	Dec 30, 2015 Reply by Elizabeth Leveques
"There really isn't any benefit to alternate the screws like you are referring to. It…" Dan F. replied Apr 29, 2010 to Edge Joining Technique	8	Jan 16, 2012 Reply by Leon Gerard
"Normally you will put the end of the screw towards your workpiece. However, you are…" Dan F. replied Mar 3, 2010 to Material support stop	3	Dec 30, 2015 Reply by Elizabeth Leveques
"The best thing to do in this situation is to back off the depth collar about 1/8" or…" Dan F. replied Feb 16, 2010 to Working with 1/2" Stock	11	Dec 30, 2015 Reply by Elizabeth Leveques
"When you are working with two different thicknesses you will want to set everything…" Dan F. replied Jan 29, 2010 to Screw size for DIFFERENT sized lumber	47	Dec 3, 2021 Reply by Cathy Bradford
"Well I was wondering if you were overdriving the screws. If you tighten them much pa…" Dan F. replied Dec 15, 2009 to joining pine	19	Jan 10, 2010 Reply by Hugh Cameron
"Do you have the drill guide block set at the 3/4" and the depth collar set to the 3/…" Dan F. replied Dec 15, 2009 to joining pine	19	Jan 10, 2010 Reply by Hugh Cameron
"Phillip is correct with everything but your screw selection. With 2X4's you will wan…" Dan F. replied Dec 11, 2009 to PLEASE HELP!	14	Dec 30, 2015 Reply by Elizabeth Leveques
"Bill, Are you mitering the back pieces at 45 degrees and then putting them together…" Dan F. replied Dec 4, 2009 to Making a Corner Cabinet	9	Nov 2, 2010 Reply by Elmer Pasaoa

‹ Previous
1
2
3
Next ›

RSS

Welcome to
Kreg Owners' Community

Sign Up
or Sign In

Or sign in with:

Need Help?

For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.

Videos

Miter Saw Workbench

Added by Mike Criss

The Ottoman with Secret

Added by Alex DrMaster

How to Build a Shaker Fireplace Surround - Woodworking

Added by Philip Miller

Forum

Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?

I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue

Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.

40mm Cup Hinge Jig Question

Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue

Started by Ed Anderson in Beginners' Zone Oct 3, 2023.

Product Reviews

New Kreg 720Pro

I saw the video Kreg put out for this new jig and had high hopes for it.

I purchased one today and am very disappointed with it.

First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…

Continue

Posted by Duke Leon on February 15, 2021 at 9:00pm

Not Pleased With Pocket Hole Construction

Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…

Continue

Posted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments

1	New Members: Please Introduce Yourself!
2	Kreg KMS7102 Table Saw Precision Miter Gauge System and the DeWalt 745 Table Saw
3	Bench
4	Bench1

Dan F.'s Discussions (27)

"You will want to use fine threaded screws in this application since you are working…"

"I was curious if the material are working with is a true 3/4" thick. Even if it is 1…"

"There really isn't any benefit to alternate the screws like you are referring to. It…"

"Normally you will put the end of the screw towards your workpiece. However, you are…"

"The best thing to do in this situation is to back off the depth collar about 1/8" or…"

"When you are working with two different thicknesses you will want to set everything…"

"Well I was wondering if you were overdriving the screws. If you tighten them much pa…"

"Do you have the drill guide block set at the 3/4" and the depth collar set to the 3/…"

"Phillip is correct with everything but your screw selection. With 2X4's you will wan…"

"Bill, Are you mitering the back pieces at 45 degrees and then putting them together…"

Need Help?

Popular Posts & Projects

Videos

Forum

Product Reviews