Other Kreg® Products (202)
| Discussions | Replies | Latest Activity |
|---|---|---|
A little upset!!!!!I was just wondering if anyone was having the same issues that I am. I have tried over and over to order accessories like screws and clamp… Started by Gerald Wayne Colbert |
37 |
Oct 13, 2011 Reply by TC |
Precision Trak & Stop SystemHas anyone used the Precision Trak & Stop System with a Delta Turret Style Radial Arm Saw? Being the pivot point for cutting miters is… Started by Doug Walls |
0 | Oct 12, 2011 |
Kreg Toolboxx AvailabilityAs earlier noted, when will the 'complete' Kreg' toolboxx become available ? I am a notorious hoarder of most tools, having an extensive… Started by Gordon D'Eri |
2 |
Sep 17, 2011 Reply by Al Barale |
Precision Miter GaugeI recently purchased a Kreg Precision Miter Gauge System for my table saw. I assembled everything and calibrated it per the instructions. I… Started by Chuck Curry |
6 |
Aug 30, 2011 Reply by Rick |
Kreg feather board wedgesMy table saw slots are 5/8". Can't figure out how to get them to work in the those slots. They are fine in my 3/4" router table slots. W… Started by Jack Bongiovanni |
3 |
Aug 4, 2011 Reply by Jack Bongiovanni |
Precision Trak & Stop SystemHi Everyone! I'm an Australian woodworker who's in the process of slowly building my dream shop (aren't we all? Dream shop, I mean, not A… Started by Craig J. Brain |
1 |
Jul 10, 2011 Reply by James Waller |
Kreg Router Table - Dewalt DW621 CompatibilityWould my Dewalt plung Router DW621 work on the Kreg router Table. Colin Started by Colin Mohammed |
3 |
Jul 7, 2011 Reply by John Schaben |
Bosch 1619 EVS routerHello everyone!!! First posting here so please bear with me...In the final stage of building an enclosed cabinet for the Kreg router sta… Started by Nicholas and Linda Brooks |
5 |
Jun 9, 2011 Reply by John Schaben |
Using Deck Jig.I'm inquiring about the use of this jig before I buy it. I need to determine if 1/4 " gap is the minimum possible. The spacers included wit… Started by jack.gallaghersan |
19 |
May 25, 2011 Reply by Noah Cantrel |
Attaching Kreg band saw fenceI have a 35 year old Delta 14" band saw. It has two holes in the left edge of its table but they are NOT threaded. Will the Kreg band saw f… Started by joel adler |
3 |
May 24, 2011 Reply by Daniel C Webster |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
