Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Should I use Latex or oil based primer?I have a desk built out of finished plywood that's ready to be primed. I don't know whether to use oil or latex primer. Of course latex is… Started by CB |
9 |
May 21, 2012 Reply by Ken Darga |
Warranty on Kreg ClampWhat's up with Kreg having no warranty on the Kreg Clamp? Mine had the inside threads strip out from normal use so I sent Kreg an e-mail a… Started by Terry Miles |
15 |
May 8, 2012 Reply by Ken Darga |
introductionHello I am a long time woodworker aand carver. I have been using the Krg Jigs for a while now and very satisfied with all of my jigs. I am… Started by Mike Valley |
0 | Apr 3, 2012 |
Painting water sealed wood?I have someone that has built an arbor some years ago and treated it with Thompson’s water sealer and now would like the arbor painted whit… Started by Kurt |
3 |
Mar 27, 2012 Reply by Ken Darga |
Strange EmailI just joined this Kreg site and got the following message on my email. Sounded very suspicious so I declined the invitation . Hello dear,… Started by Richard Scott |
7 |
Mar 16, 2012 Reply by Robert Brennan |
Aluminum T-trackI am wondering where the most reasonable place is to buy t-track for mu workbench. I have a budget and it seems the the prices vary from m… Started by Adam Adolph |
29 |
Feb 29, 2012 Reply by Rick |
Cutting list layout software?Does anyone know of any freeware, shareware, or otherwise inexpensive cutting list layout software? TIA Started by Brian K |
4 |
Feb 24, 2012 Reply by Brian K |
k3 jigIve been a craig jig user for a very long time using the 2000 jig.I wanted the option of the micro jig so i bought a master system so i tho… Started by Nathan Beyer |
14 |
Jan 16, 2012 Reply by Rick |
Christmas Appreciation to Allhttp://smilebox.com/playBlog/4d6a67344d7a49334d44493d0d0a&blogview=true Started by Jay Boutwell |
6 |
Dec 24, 2011 Reply by Douglas Harwood |
Depth Collar SlippingI would like to see a flat spot on the shank of the bit to keep the collar from slipping while drilling. this has happened 2 times even tho… Started by James Pittman Jr. |
9 |
Dec 8, 2011 Reply by James Pittman Jr. |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
1 |
K5 Repair |
2 |
Keepsake Box |
3 |
Turned Wands |
4 |
Boxes |
5 |
Turned Pipes |
6 |
Pizza Cutters |
7 |
Bookmarks |
8 |
Coffin Shelf |
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service