Sort by:
Discussions | Replies | Latest Activity |
---|---|---|
Byrd ShelixAnyone installed a Byrd Shelix head on their planer? Looking for likes and dislikes. I have a Jet 3hp 15 inch. The place where I usually… Started by justin waldron |
4 |
Mar 14, 2013 Reply by justin waldron |
Started KreggingFinally found time and weather to start my workbench. My wife came home as I assembled a frame. SHE was impressed with simplicity of pocket… Started by Mickey Bailey |
2 |
Mar 13, 2013 Reply by KregRep |
45 degree joints with pocket holesThe photo below is what I want to do. 3/4 inch ply joined together at 90 Degrees with a 45 degree miter. Holes on the inside will be hidd… Started by John Nelson |
4 |
Mar 12, 2013 Reply by John Nelson |
Work Bench DOs and DONTs Planing to build oneI planing on building a workbench and Gary Roofner posted this link: http://www.finewoodworking.com/workshop/video/new-fangled-workbench-r… Started by Jerrod McCrary |
6 |
Mar 12, 2013 Reply by Jerrod McCrary |
Resaw fence addition for Kreg bandsaw fence.I would like to build a ~8in. tall re-saw fence for my Kreg bandsaw fence. I want to attach it to the fence without having hardware on the… Started by John Hock |
3 |
Mar 11, 2013 Reply by Ken Darga |
tabletops for log furniture.Does anyone know where i can find wood slabs to use as table tops for log furniture? Started by Frank Windsor |
11 |
Mar 7, 2013 Reply by Ken Darga |
BRIDGE BUILDINGHi all, i have been asked to make 3 little arched bridges for some local childminding gruops/nurseries.They will be 4feet long 18" high wit… Started by michael evans |
2 |
Mar 7, 2013 Reply by michael evans |
French cleat system.Here is an interesting video. http://lumberjocks.com/Stevinmarin/blog/34799 Anyone built a french cleat system and has pictures to share. Started by Gary roofner |
5 |
Mar 6, 2013 Reply by Ken Darga |
Farm table glue upI'm building a 36" X 96" table. The top consist of (7) 2X6 wide. I'm joining the 2" edges with Kreg screws @ 12" oc with biscuits in betwee… Started by Leroy Pate |
5 |
Mar 3, 2013 Reply by james wilhelm |
2x2 Glue upI'm using pine 2x2's to create a solid piece of wood for a King sized headboard. I'm distressing the wood individually. I will be gluing… Started by jawomack25 |
2 |
Mar 2, 2013 Reply by Rick |
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep. Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service