Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
Broken part on my kreg jigHelp can you buy the round clamping disk that clamps your wood to the jig mine cracked in half. I don't want to buy a new jig just to fi… Started by Gary roofner |
5 |
Nov 22, 2013 Reply by Gary roofner |
Best time to drill the pocket holesI would like to have an experts opinion about when to drill the pocket holes. 1. Before sanding and varnishing? 2. After sanding but before… Started by Edgar E Arias |
4 |
Nov 18, 2013 Reply by Steve McCullough |
Which one to get.I am thinking about getting a Kreg and was wondering what is the first thing i need to get started and try and see if i like it. Started by Robert Peden |
5 |
Nov 14, 2013 Reply by Kent Kinsala |
Looking for a plan to add an hinged extension on my work bench.Something simple to add more space for working. Started by Chad Bussey |
10 |
Nov 10, 2013 Reply by Gary roofner |
Stud wall with pocket screwsIs there anything wrong with building an interior stud wall with pocket screws, or would framing nails be a better route? Framing nails wou… Started by Ethan |
7 |
Nov 8, 2013 Reply by James Cox |
Small big problem .The round part that is the clamping surface broke in half can you just buy that part or do you have to buy a new jig? Started by Gary roofner |
0 | Nov 8, 2013 |
Selector wheelI am a Big fan of Kreg but I am not a fan of the only store in my area that carries their products. I just returned home from that store, I… Started by Michael mitchell |
17 |
Nov 6, 2013 Reply by Michael mitchell |
CRAFTSMAN OR RIKON 10" BAND SAWI am looking for a bench top band saw. I am down to the Rikon or Craftsman. Looking at them I see no difference. The only difference seems… Started by Michael Coughlin |
1 |
Nov 5, 2013 Reply by Ken Darga |
Wood Thickness for Dresser DrawersI want to build dresser drawers with Kreg joints. Dimensions: L- 31" w- 24" d- 9". Can I get away with using a pine plywood that's 1/2" thi… Started by Bryan Patrick |
10 |
Nov 1, 2013 Reply by Bryan Patrick |
Joining 3/4" stock to 2 3/4 vanity post, which depth? Which screw length?Hi all, I saw a bathroom vanity that i wanted to attempt, but before i jump in, I wanted to make sure my plan to secure 3/4" stock to the 2… Started by Sam Nattan |
4 |
Oct 30, 2013 Reply by Ken Darga |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
