Beginners' Zone (1,312)
| Discussions | Replies | Latest Activity |
|---|---|---|
Removing stain smell from your pieceWhat is the best solution for removing that nasty stain smell from your woodworking piece? I'm building a captains bed for me and my expect… Started by Don Grubish |
12 |
Dec 24, 2011 Reply by Mark Ruggles |
Best way to put in adjustable shelves?I'm building a recessed cabinet/shelf unit in my bathroom, going 12" into an oversized space that the previous owners created for the batht… Started by Buela Martinez |
4 |
Dec 23, 2011 Reply by Bill Edis |
First big Kreg project: Ikea hack coffee table... advice needed!I've done a few small projects with Kreg tools before, but this will be my first custom undertaking and I'd appreciate any advice. I'm ma… Started by loren |
1 |
Dec 13, 2011 Reply by Hugh Clare |
Advice/input on my first projectHi. I am starting my first project. I'm building a bathroom cabinet and have done the plans in SketchUp. If you're interested, I'd apprecia… Started by Jim C |
7 |
Dec 12, 2011 Reply by James Waller |
kreg clampswhat do you people think about the pocket hole joinery clamp Dont know if they are any better than the vice grip type. those ones they… Started by kenneth kindle |
2 |
Dec 11, 2011 Reply by Jens Jensen |
Using kregg jig to put together a top measuring 20 inches by 75 inches. Wood is birch and is about 2 3/4 inches wideStarted by Bruce W Phillips |
0 | Dec 11, 2011 |
pocket hole plugsI was recently working on an oak computer cabinet using pocket holes to construct the cabinet. When I starting to fill the pocket holes wit… Started by Jerry OBrien |
6 |
Dec 10, 2011 Reply by Ken Darga |
Glue Guidehello, please explain the open time and clamp time in the glue guide Started by W. Lawrence |
2 |
Dec 4, 2011 Reply by John Schaben |
Help - I need to raise workbench to match height of other workbenchAs my first Kreg project I am building the workbench as per the project plan page. I made a mistake with the leg heights and having complet… Started by Gerard Doyle |
17 |
Dec 3, 2011 Reply by Dean Hartley |
Face Frame WidthThrough a little research I have found that a 2" wide face frame seems to be the most popular. Can anyone tell me why that width is popular… Started by Eric Theriot |
6 |
Dec 3, 2011 Reply by Steve |
Need Help?
For Technical Support, please call 800-447-8638 or send a message. Reps are available Monday through Friday from 8am to 5pm CST.
Popular Posts & Projects
Videos
Forum
Jig settings for 2 ¾ x 1 ½ boards with 30 degree miters?
I making a hex ring out of 2x4s ripped to 2 ¾ inches wide with 30 degree miters. What setting on the Jig should I used? 1 ½ is too much. Thanks.Continue
Started by Patrick Halinski in Kreg Jig® Operation Dec 30, 2023.
40mm Cup Hinge Jig Question
Hi All.....I have the 35mm Kreg Jig hinge drill guide. The guide is great for 35mm Hinge Cups, but I have a speciality 40MM hinge cup to drill.Has anyone adapted the Kreg guide to work with 40mm Forsner drill bits? Or have a guide that works…Continue
Started by Ed Anderson in Beginners' Zone Oct 3, 2023.
Product Reviews
New Kreg 720Pro
I saw the video Kreg put out for this new jig and had high hopes for it.
I purchased one today and am very disappointed with it.
First the docking station is extremely cheap. The plastic is pathetic. A Lego has more…
ContinuePosted by Duke Leon on February 15, 2021 at 9:00pm
Not Pleased With Pocket Hole Construction
Several months ago, I purchased the Kreg K4MS so that I could build the Lego Table as outlined on the companion "buildsomething" web site which exclusively uses pocket hole construction. I have considerable experience with conventional…
ContinuePosted by Robert Ringel on September 17, 2020 at 1:48pm — 9 Comments
© 2024 Created by KregRep.
Powered by
Badges | Report an Issue | Privacy Policy | Terms of Service
